Check Easy Logo
New · Maintenance and repairs

Every issue reported,tracked until it's fixed

A guest or a cleaner scans the property's QR code and reports the problem from their phone, no account needed. It reaches the right technician as a job, the technician closes it with photos, your team approves.

14-day free trial · No commitment

Maintenance, the blind spot of short-term rental

Breakdowns happen between stays, when nobody from the team is on site.

  • Problems found too late

    The hob that no longer heats, the leak under the sink: you find out from a review or from the next guest.

  • Lost requests

    Texts, messaging apps, calls: the guest's request does not always reach the right technician.

  • Repairs without proof

    The technician says it's fixed, but you have no photo or write-up to show the owner.

  • No overview

    Hard to see at a glance which properties are occupied, vacated or ready for the next guest.

The journey of an issue

From the scanned QR code to the approved repair, every step leaves a trace.

  1. 1

    Reported

    The guest or cleaner scans the QR code: room, type of problem, photo, urgency.

  2. 2

    Centralised

    The issue joins those from cleaning, from guests and the anomalies spotted by AI.

  3. 3

    Assigned

    It becomes a job for a technician, with a date. The technician is notified by email.

  4. 4

    Fixed

    The technician describes what was done and adds photos from their phone.

  5. 5

    Approved

    Your team checks and approves, or sends the job back to be redone.

An issue reported in a few taps, no account needed

A QR code stuck in the property opens the "Report a problem" page on the phone. The guest or cleaner has nothing to install or create.

  • The room and the type of problem: damage or breakage, broken equipment, cleanliness, missing item, other.
  • A short description and a photo.
  • Urgent or not, whether a repair is wanted and, if the guest agrees, permission to enter while they are out.

You are notified by email as soon as an issue is reported.

The right technician, the right job

Add your technicians to the team, just like your cleaners. An issue becomes a job in one step; you can also create a job yourself.

  • A repair date and a clear schedule: overdue, today, no date.
  • The technician is notified by email with a link to their jobs, and signs in with a code received by text message.
  • A "technician area" QR code per property: on site, they see what needs doing.
  • Comments exchanged with the team, job by job.
  • "I'm done": they describe what they did and add photos. Your team approves or sends the job back.

All issues in one place

One list for everything that needs handling, whatever the source of the issue. Filter by property, to do or done, and see where each repair stands.

  • Guests
  • Cleaning team
  • QR code
  • Anomalies spotted by AI
  • Technician jobs
  • Photo and video

    From their flow, guests and cleaners attach photos and a video of up to 30 seconds.

  • Sorted by AI in one click

    The AI suggests a category, a severity and the type of tradesperson to call.

Issues and repairs of the period are included in the owner report. See owner reports

The status of every property, in real time

Check Easy updates the status as stays and visits happen. You can see at a glance where each property stands.

Occupied

A guest is staying in the property.

Vacated

The guest has left: cleaning is due.

Ready for guests

Cleaning is done: the property can welcome the next guest.

Closed

Off season: no automatic change while it stays closed.

The status follows the guest's check-in and departure, the cleaning visit and the end-of-season closure. You can also change it by hand; the history is kept.

Notifications you can switch on for your agency: the scheduled cleaning team is told when the property is vacated, and a guest arriving that day is told when it is ready.

All the property's QR codes on a single page

One A4 sheet per property, to stick on the back of the door. Guests find what concerns them, in French and English; the team finds its access points.

  • For guests: check-in inspection, report a problem, welcome book, local tips.
  • For the team: cleaning visit, technician area and, only on request, quality inspection.
  • All sheets exported in one go for printing.
  • Incomplete sheets are flagged, for example when the welcome book is not yet published.

Agency inspection visits, point by point

Quality inspection is a third type of checklist, alongside the guest and cleaning ones. It is used for in-season inspection visits and end-of-season closures.

  • Each point is "compliant" or "to review", with photos; a point to review requires a comment.
  • A default list of points (appliances, smoke detector, leaks, inventory, keys…) to adapt to each property.
  • The end-of-season closure sets the property to "Closed".
  • A dedicated report and PDF, included in the owner report.
« We use Check Easy daily. The tool removes a huge mental load: controls are integrated into the tool. We have truly centralized everything. »
Arthur & ClarisseCo-founders, Mon Petit Faré (60 properties)

Frequently asked questions

Issues, technicians and property tracking with Check Easy.

They scan the QR code stuck in the property, for example on the sheet on the back of the door. The "Report a problem" page opens on their phone, with no account or app to install: they choose the room and the type of problem, describe it, add a photo and say whether it is urgent.

You add them to your team with their phone number. For each job assigned, they receive an email with a link to their jobs and sign in with a code sent by text message. On site, the property's "technician area" QR code shows them what needs doing.

The technician closes the job by describing what was done, with photos. The job moves to "under review": your team approves it, or sends it back "to redo" with a comment.

Yes. It switches to "Occupied" at the guest's check-in, "Vacated" when they leave, "Ready for guests" after the cleaning visit and "Closed" after an end-of-season closure. You can change it by hand; every change is logged.

For the visits the agency itself makes to the property: in-season inspection or end-of-season closure. Each point is marked compliant or to review, with photos, and a dedicated report is produced.

Yes. The owner report includes the issues of the period with their status and what the technician did, as well as the quality inspections.

Yes. In your preferences, you keep or turn off three families of emails: notifications (reported issues, delays, bookings, messages and planning), visit reports and confirmations, and tips and product news. Billing, deposit and security emails are always sent.

Stop finding out about breakdowns from reviews

Equip your properties with QR codes and track every repair. 14-day free trial, no commitment.

Start the free trial